NORTON THEOREM

Any active network can be represented as an equivalent current source with an impedance connected in parallel across it. Simplifying any network by converting the active part of that network to an equivalent current source with an impedance connected in parallel is called Norton Theorem.

Norton Theorem is just alternative of thevenin theorem. In this theorem, the circuit network is reduced into a single constant current source in which, the equivalent internal resistance is connected in parallel with it. Every voltage source can be converted into equivalent current source. Suppose, in a complex network we have to find out the current through a particular branch. If the network has one or more active sources, these will supply current to the said branch. As in the said branch current comes from rest of the network, it can be considered that the network itself is a current source. The equivalent impedance of the network across the branch is nothing but the impedance of the equivalent current source, and hence it is connected in parallel.

The equivalent resistance of a network is the equivalent electrical resistance of the network when someone looks back into the network from the terminals where said branch is connected. During calculating this equivalent resistance, all sources are removed leaving their internal resistances in the network. Actually, in Norton Theorem, the branch of the network through which we have to find out the current, is removed from the network. After removing the branch, we short circuit the terminals where the said branch was connected. Then we calculate the short circuit current that flows between the terminals. This current is nothing but Norton equivalent current I_N of the source. The equivalent resistance between the said terminals with all sources removed leaving their internal resistances in the circuit is calculated and say, it is R_N. Now we will form a current source that’s current is I_N A and internal shunt resistance is R_N Ω. For getting a clearer concept of this theorem, we have explained it by the following example.In the example, two resistances R₁ and R₂ are connected in series and this series combination is connected across one voltage source of emf E with internal resistance R_i as shown. Series combination of one resistive branch of R_L and another resistance R₃ is connected across the resistance R₂ as shown. Now we have to find out the current through R_L by applying Norton Theorem.
First, we have to remove the resistance R_L from terminals A and B and make the terminals A and B short circuited by zero resistance.
Second, we have to calculate the short circuit current or Norton equivalent current I_N through the points A and B.The equivalent resistance of the network,To determine internal resistance or Norton equivalent resistance R_N of the network under consideration, remove the branch between A and B and also replace the voltage source by its internal resistance. Now the equivalent resistance as viewed from open terminals A and B is R_N,As per Norton Theorem, when resistance R_L is reconnected across terminals A and B, the network behaves as a source of constant current I_N with shunt connected internal resistance R_N and this is Norton equivalent circuit.

Norton Equivalent Circuit